Innovation in contract fabrics
Colourway, Composition & End Uses
| Colourway | 252 Willow |
| Fabric Type | Vinyl |
| Composition | Coating PVC,PU blend,Basecloth cotton,polyester |
| End Uses |
|
Dimensions & Weight
| Width (cm): | 140.00 (approx.) |
| Weight (g/m2) | 720.00 (± 5%) |
| Height Repeat (cm): | — |
| Side Repeat (cm): | — |
Wash & Care Instructions
- Vacuum or wipe clean routinely with a microfibre cloth lightly dampened with cold water only.
- Wipe clean routinely with a microfibre cloth, lightly dampened with cold water only. Then dry with a clean absorbent cloth.
- Most stains can be removed by wiping clean if tackled immediately.
- Soak up spillages as soon as possible with an absorbent dry cloth to prevent staining.
- Do not apply solvent based cleaners or other chemicals to the fabric.
- Remove body fluids promptly (within 15 minutes) with cold water
- Note dyes and pigments from indigo jeans, ball point and felt tip pens may permanently stain.
- Remove body fluids and extreme soiling immediately (within 15 minutes) with cold water then apply approved infection control protocol: Haz Tabs, Chlor Clean or Shield Plus etc. As the concentration of bleach can vary greatly among proprietary brands we recommend these be avoided. Remove product residues and then dry with clean absorbent cloth.
- Note steam cleaning disinfects but the application of heat may fix staining substances and may result in permanent marks.
- Do not use a felt tip, ball point pen or ink to mark as these can leave permanent stains.
- Do not steam clean.
- Do not dry clean.
- For general soiling, use a microfibre cloth taking care to avoid abrasive damage to surface and use tepid, soapy water (pH neutral). Rinse clean with water and dry with an absorbent cloth.
- With any aspect of cleaning, it is essential that all residue is removed from the surface. Do not leave any liquids in situ.
- Do not apply solvents, alcohol or any other chemical cleaners
Product Technology
- Stain Resistant Finish
- Waterproof
- Anti-Microbial
- Colour Fastness to Chlorinated Water - Grade 4-5
- Colour Fastness to Sea Water - Grade 4-5
- Colour Fastness to Light - Grade 6+
- Colour Fastness to Artificial Weathering - Grade 8
Flammability Ratings
- BS5852: 2006 Ignition Source 5
- BS7176: Medium Hazard
- EN1021-1/2
- IMO - FTP 2010 PART 8 (previously A.652 (16))
- NFPA 260 (USA)
- CAL TB 116 and 117
Durability
- Martindale 750,000, Wyzenbeek 100,000, Burst Strength 1824 kPa
Alternative Colours
See All (24)-
Brookland
407 Burgundy
View Brookland — 407 Burgundy
Brookland -
Brookland
814 Espresso
View Brookland — 814 Espresso
Brookland -
Brookland
801 Tan
View Brookland — 801 Tan
Brookland -
Brookland
805 Cream
View Brookland — 805 Cream
Brookland -
Brookland
823 Chablis
View Brookland — 823 Chablis
Brookland -
Brookland
807 Mushroom
View Brookland — 807 Mushroom
Brookland -
Brookland
822 Hide Green
View Brookland — 822 Hide Green
Brookland -
Brookland
229 Forest
View Brookland — 229 Forest
Brookland -
Brookland
116 Navy
View Brookland — 116 Navy
Brookland -
Brookland
624 Mulberry
View Brookland — 624 Mulberry
Brookland -
Brookland
400 Red
View Brookland — 400 Red
Brookland -
Brookland
900 Black
View Brookland — 900 Black
Brookland -
Brookland
005 Chalk
View Brookland — 005 Chalk
Brookland -
Brookland
108 Delph
View Brookland — 108 Delph
Brookland -
Brookland
129 Ocean
View Brookland — 129 Ocean
Brookland -
Brookland
209 Wasabi
View Brookland — 209 Wasabi
Brookland -
Brookland
252 Willow
View Brookland — 252 Willow
Brookland -
Brookland
444 Cherry
View Brookland — 444 Cherry
Brookland -
Brookland
501 Smoke
View Brookland — 501 Smoke
Brookland -
Brookland
744 Saddle
View Brookland — 744 Saddle
Brookland -
Brookland
803 Mahogany
View Brookland — 803 Mahogany
Brookland -
Brookland
904 Pewter
View Brookland — 904 Pewter
Brookland -
Brookland
911 Steel
View Brookland — 911 Steel
Brookland -
Brookland
925 Putty
View Brookland — 925 Putty
Brookland